Diesel
Concrete Stationary
Pump operation and attention
Concrete Stationary Pump, as well known as Trailer
concrete pump, it was installed of
pump parts, hydraulic system and diesel engine power. It was
the machine by high pressure transport
concrete along
the pipeline continuously, which was mainly used for
the the community construction, Bridges project and tunnel building. It was mainly divided into diesel fuel
concrete pump and electric motor
concrete pump.
How to use
the Concrete Stationary Pump
1) Put
the Concrete Stationary
Pump on
the solid as well as flat ground, it was supporting by
the steel legs.
2) check electric control system power is normal, make
the switch buttons and set of all parts in working condition,
the concrete delivery pipe jointed tightly and sealed and
the pipe clips firmly. If you connect
the vertical pipe, no less than 8 meters in front of
the horizontal pipe.
3) When
the work finished, disassembly and clean
the pipeline,
the back-
pumping method need to remove
the pressure of
the delivering pipes, please don’t remove hopper griddle and o
ther safety parts during
the machine
operation. And
the workers not allowed to climb or ride
the delivery pipeline, don’t put your hands into
the valve hopper, do not remove any pipes when working.
4) Please don’t forget to clean
the pipe,
the operator discharge
the pipes and elbows. When cleaning
the pipe by
the water, no one be allowed in
the front of 10 meters at least.
7) after cleaning
the pipe, hydraulic system, stop
pumping function and return all
the control switches to
the original position.