Concrete batching plant which one is better, mobile or fixed?
slopoutor > 06-14-2024, 03:33 AM
Concrete mixing stations are currently widely used mechanical equipment. Many people are hesitating between mobile and fixed types. CinaCharm will analyze the usage scenarios of the two models for everyone.
According to the differences in their structures, CinaCharm concrete mixing plants can be divided into movable mixing plants and fixed mixing plants.
The movable mixing station has good maneuverability and is suitable for small and medium-sized temporary building construction sites. The fixed mixing station has good stability and can be suitable for medium and large commercial concrete manufacturers.
According to the difference in operation mode, CinaCharm concrete mixing plant can be divided into intermittent type and periodic type.
The intermittent feeding and discharging system is based on cycles. After the materials are weighed, stirred, and discharged, they will enter the next cycle. This method is more controllable and widely used. The continuous feeding and discharging is a complete flow operation and does not affect the overall construction period.
According to the difference in its technical placement form, CinaCharm concrete batching plant can be divided into single-stage type and double-stage type.
The single-stage type is to lift sand, aggregate, cement and other materials to the silo on the roof of the mixing station. Various materials are weighed, batched, and mixed according to the technical process until they are made into concrete mixers, which are discharged from the bottom. Loading and transportation. The single-stage technical process is complete and the productivity is high. However, due to the large investment in the single-stage type, generally speaking, the requirements for the factory are higher. The two-stage type is to first lift the required materials such as sand, gravel, aggregate, cement, etc. to the storage silo, and then lift or transport them to the mixer for mixing after being weighed in the storage silo. The materials need to be lifted twice during the whole process, which results in low productivity.
However, it is easy to disassemble and assemble and can reduce investment. This method is commonly used in general concrete mixing plants.
Both models have their own advantages and disadvantages. You need to choose the suitable type according to the factory's conditions. If you have any questions or needs, please feel free to consult CinaCharm.