There are many classification standards for
concrete plants.
Concrete plant can be divided into dry mix
plant and wet mixing
plants, depending on whether a central mixer is used.It also can be divided into stationary
concrete plant and mobile
concrete plant, depending on whether can be movable.
Dry mix
concrete plant
A dry mix
concrete plant, also known as transit mix
plant, weighs sand, gravel and cement in weight batchers via digital or manual scales. All these ingredients then are discharged into a chute which discharges into a truck. Meanwhile, water is either being weighed or volumetrically metered and discharged through the same charging chute into the mixer truck. This ingredients are then mixed for a minimum of 70 to 100 revolutions, during transportation to the jod site.
Wet mix
concrete plant
A
wet mix concrete plant, combines some or all of the above ingredients(including water) at a central location into a
concrete mixer- that is, the
concrete is mixed at a single point, and then simply agitated on the way to the job site to prevent setting (using agitators or ready mix trucks) or hauled to the job site in an open-bodied dump truck.
Dry mix differs from wet mixing
plants in that wet mix contains a central mixer whereas dry.Which can offer a more consistent mixture in a shorter time(generally 5 minutes or less). Dry mix
plants typically see more break strength standard deviation and variation from load to load because of inconsistencies in mixing times, truck blade and drum conditions, traffic conditions, etc.
With a central mix
plant, all loads see the same mixing action and there is an initial quality control point when discharging from the central mixer. Certain
plants combine both dry and wet characteristics for increase production or for seasonality. A mobile batch
plant can be constructed on a large job site.
Mobile
concrete plant
The
mobile batching plant, also known as a portable
concrete plant is a very productive, reliable, and cost-effective piece of equipment to produce batches of
concrete. It allows the user to batch
concrete at the most any location then move to another location. Portable
plants are the best choice for temporary site projects or even stationary locations where the equipment height is a factor or the required production rate is lower.
Stationary
concrete plant
The
stationary concrete plant is designed for produce high-quality
concrete. It has advantages of large output, high efficiency, high stability and high specification. Stationary
concrete batching
plant adopts reliable and flexible. It is easy to maintenance and owning a low failure rate. It is widely used in various projects such as roads and bridges, ports, tunnels dams and buildings.
If you're interested of haomei
concrete batching
plant, please contact us:
Website:
http://www.haomei.biz
Email: wade@haomei.biz